Please use this identifier to cite or link to this item:
http://localhost/handle/Hannan/654484
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Taehoon Kim | en_US |
dc.contributor.author | Sangmin Shin | en_US |
dc.contributor.author | Hyongmin Lee | en_US |
dc.contributor.author | Hyunsook Lee | en_US |
dc.contributor.author | Heewon Kim | en_US |
dc.contributor.author | Eunhee Shin | en_US |
dc.contributor.author | Suhwan Kim | en_US |
dc.date.accessioned | 2020-05-20T10:23:03Z | - |
dc.date.available | 2020-05-20T10:23:03Z | - |
dc.date.issued | 2016 | en_US |
dc.identifier.issn | 0885-3010 | en_US |
dc.identifier.other | 10.1109/TUFFC.2015.2508148 | en_US |
dc.identifier.uri | http://localhost/handle/Hannan/141020 | en_US |
dc.identifier.uri | http://localhost/handle/Hannan/654484 | - |
dc.description | en_US | |
dc.description.abstract | A flexible clinical ultrasound system must operate with different transducers, which have characteristic impulse responses and widely varying impedances. The impulse response determines the shape of the high-voltage pulse that is transmitted and the specifications of the front-end electronics that receive the echo; the impedance determines the specification of the matching network through which the transducer is connected. System-level optimization of these subsystems requires accurate modeling of pulse-echo (two-way) response, which in turn demands a unified simulation of the ultrasonics and electronics. In this paper, this is realized by combining MATLAB/Simulink models of the high-voltage transmitter, the transmission interface, the acoustic subsystem which includes wave propagation and reflection, the receiving interface, and the front-end receiver. To demonstrate the effectiveness of our simulator, the models are experimentally validated by comparing the simulation results with the measured data from a commercial ultrasound system. This simulator could be used to quickly provide system-level feedback for an optimized tuning of electronic design parameters. | en_US |
dc.publisher | IEEE | en_US |
dc.relation.haspart | 7353213.pdf | en_US |
dc.subject | Science & Technology | en_US |
dc.title | MATLAB/Simulink Pulse-Echo Ultrasound System Simulator Based on Experimentally Validated Models | en_US |
dc.type | Article | en_US |
dc.journal.volume | 63 | en_US |
dc.journal.issue | 2 | en_US |
dc.journal.title | IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control | en_US |
Appears in Collections: | 2016 |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
7353213.pdf | 2.51 MB | Adobe PDF | ![]() Preview File |
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Taehoon Kim | en_US |
dc.contributor.author | Sangmin Shin | en_US |
dc.contributor.author | Hyongmin Lee | en_US |
dc.contributor.author | Hyunsook Lee | en_US |
dc.contributor.author | Heewon Kim | en_US |
dc.contributor.author | Eunhee Shin | en_US |
dc.contributor.author | Suhwan Kim | en_US |
dc.date.accessioned | 2020-05-20T10:23:03Z | - |
dc.date.available | 2020-05-20T10:23:03Z | - |
dc.date.issued | 2016 | en_US |
dc.identifier.issn | 0885-3010 | en_US |
dc.identifier.other | 10.1109/TUFFC.2015.2508148 | en_US |
dc.identifier.uri | http://localhost/handle/Hannan/141020 | en_US |
dc.identifier.uri | http://localhost/handle/Hannan/654484 | - |
dc.description | en_US | |
dc.description.abstract | A flexible clinical ultrasound system must operate with different transducers, which have characteristic impulse responses and widely varying impedances. The impulse response determines the shape of the high-voltage pulse that is transmitted and the specifications of the front-end electronics that receive the echo; the impedance determines the specification of the matching network through which the transducer is connected. System-level optimization of these subsystems requires accurate modeling of pulse-echo (two-way) response, which in turn demands a unified simulation of the ultrasonics and electronics. In this paper, this is realized by combining MATLAB/Simulink models of the high-voltage transmitter, the transmission interface, the acoustic subsystem which includes wave propagation and reflection, the receiving interface, and the front-end receiver. To demonstrate the effectiveness of our simulator, the models are experimentally validated by comparing the simulation results with the measured data from a commercial ultrasound system. This simulator could be used to quickly provide system-level feedback for an optimized tuning of electronic design parameters. | en_US |
dc.publisher | IEEE | en_US |
dc.relation.haspart | 7353213.pdf | en_US |
dc.subject | Science & Technology | en_US |
dc.title | MATLAB/Simulink Pulse-Echo Ultrasound System Simulator Based on Experimentally Validated Models | en_US |
dc.type | Article | en_US |
dc.journal.volume | 63 | en_US |
dc.journal.issue | 2 | en_US |
dc.journal.title | IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control | en_US |
Appears in Collections: | 2016 |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
7353213.pdf | 2.51 MB | Adobe PDF | ![]() Preview File |
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Taehoon Kim | en_US |
dc.contributor.author | Sangmin Shin | en_US |
dc.contributor.author | Hyongmin Lee | en_US |
dc.contributor.author | Hyunsook Lee | en_US |
dc.contributor.author | Heewon Kim | en_US |
dc.contributor.author | Eunhee Shin | en_US |
dc.contributor.author | Suhwan Kim | en_US |
dc.date.accessioned | 2020-05-20T10:23:03Z | - |
dc.date.available | 2020-05-20T10:23:03Z | - |
dc.date.issued | 2016 | en_US |
dc.identifier.issn | 0885-3010 | en_US |
dc.identifier.other | 10.1109/TUFFC.2015.2508148 | en_US |
dc.identifier.uri | http://localhost/handle/Hannan/141020 | en_US |
dc.identifier.uri | http://localhost/handle/Hannan/654484 | - |
dc.description | en_US | |
dc.description.abstract | A flexible clinical ultrasound system must operate with different transducers, which have characteristic impulse responses and widely varying impedances. The impulse response determines the shape of the high-voltage pulse that is transmitted and the specifications of the front-end electronics that receive the echo; the impedance determines the specification of the matching network through which the transducer is connected. System-level optimization of these subsystems requires accurate modeling of pulse-echo (two-way) response, which in turn demands a unified simulation of the ultrasonics and electronics. In this paper, this is realized by combining MATLAB/Simulink models of the high-voltage transmitter, the transmission interface, the acoustic subsystem which includes wave propagation and reflection, the receiving interface, and the front-end receiver. To demonstrate the effectiveness of our simulator, the models are experimentally validated by comparing the simulation results with the measured data from a commercial ultrasound system. This simulator could be used to quickly provide system-level feedback for an optimized tuning of electronic design parameters. | en_US |
dc.publisher | IEEE | en_US |
dc.relation.haspart | 7353213.pdf | en_US |
dc.subject | Science & Technology | en_US |
dc.title | MATLAB/Simulink Pulse-Echo Ultrasound System Simulator Based on Experimentally Validated Models | en_US |
dc.type | Article | en_US |
dc.journal.volume | 63 | en_US |
dc.journal.issue | 2 | en_US |
dc.journal.title | IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control | en_US |
Appears in Collections: | 2016 |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
7353213.pdf | 2.51 MB | Adobe PDF | ![]() Preview File |