Please use this identifier to cite or link to this item: http://localhost/handle/Hannan/585908
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRemus Narcis Beresen_US
dc.contributor.authorXiongfei Wangen_US
dc.contributor.authorFrede Blaabjergen_US
dc.contributor.authorMarco Liserreen_US
dc.contributor.authorClaus Leth Baken_US
dc.date.accessioned2020-05-20T08:35:13Z-
dc.date.available2020-05-20T08:35:13Z-
dc.date.issued2016en_US
dc.identifier.issn0885-8993en_US
dc.identifier.issn1941-0107en_US
dc.identifier.other10.1109/TPEL.2015.2441299en_US
dc.identifier.urihttp://localhost/handle/Hannan/154295en_US
dc.identifier.urihttp://localhost/handle/Hannan/585908-
dc.description.abstractHarmonic stability problems caused by the resonance of high-order filters in power electronic systems are ever increasing. The use of passive damping does provide a robust solution to address these issues, but at the price of reduced efficiency due to the presence of additional passive components. Hence, a new method is proposed in this paper to optimally design the passive damping circuit for the LCL filters and LCL with multituned LC traps. In short, the optimization problem reduces to the proper choice of the multisplit capacitors or inductors in the high-order filter. Compared to existing design procedures, the proposed method simplifies the iterative design of the overall filter while ensuring the minimum resonance peak with a lower damping capacitor and a lower rated resistor. It is shown that there is only one optimal value of the damping resistor or quality factor to achieve a minimum filter resonance. The passive filters are designed, built, and validated both analytically and experimentally for verification.en_US
dc.publisherIEEEen_US
dc.relation.haspart7118223.pdfen_US
dc.subjecttrap filter|voltage-source converters|LCL filter|harmonic passive filters|resonance dampingen_US
dc.titleOptimal Design of High-Order Passive-Damped Filters for Grid-Connected Applicationsen_US
dc.typeArticleen_US
dc.journal.volume31en_US
dc.journal.issue3en_US
dc.journal.titleIEEE Transactions on Power Electronicsen_US
Appears in Collections:2016

Files in This Item:
File Description SizeFormat 
7118223.pdf1.7 MBAdobe PDFThumbnail
Preview File
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRemus Narcis Beresen_US
dc.contributor.authorXiongfei Wangen_US
dc.contributor.authorFrede Blaabjergen_US
dc.contributor.authorMarco Liserreen_US
dc.contributor.authorClaus Leth Baken_US
dc.date.accessioned2020-05-20T08:35:13Z-
dc.date.available2020-05-20T08:35:13Z-
dc.date.issued2016en_US
dc.identifier.issn0885-8993en_US
dc.identifier.issn1941-0107en_US
dc.identifier.other10.1109/TPEL.2015.2441299en_US
dc.identifier.urihttp://localhost/handle/Hannan/154295en_US
dc.identifier.urihttp://localhost/handle/Hannan/585908-
dc.description.abstractHarmonic stability problems caused by the resonance of high-order filters in power electronic systems are ever increasing. The use of passive damping does provide a robust solution to address these issues, but at the price of reduced efficiency due to the presence of additional passive components. Hence, a new method is proposed in this paper to optimally design the passive damping circuit for the LCL filters and LCL with multituned LC traps. In short, the optimization problem reduces to the proper choice of the multisplit capacitors or inductors in the high-order filter. Compared to existing design procedures, the proposed method simplifies the iterative design of the overall filter while ensuring the minimum resonance peak with a lower damping capacitor and a lower rated resistor. It is shown that there is only one optimal value of the damping resistor or quality factor to achieve a minimum filter resonance. The passive filters are designed, built, and validated both analytically and experimentally for verification.en_US
dc.publisherIEEEen_US
dc.relation.haspart7118223.pdfen_US
dc.subjecttrap filter|voltage-source converters|LCL filter|harmonic passive filters|resonance dampingen_US
dc.titleOptimal Design of High-Order Passive-Damped Filters for Grid-Connected Applicationsen_US
dc.typeArticleen_US
dc.journal.volume31en_US
dc.journal.issue3en_US
dc.journal.titleIEEE Transactions on Power Electronicsen_US
Appears in Collections:2016

Files in This Item:
File Description SizeFormat 
7118223.pdf1.7 MBAdobe PDFThumbnail
Preview File
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRemus Narcis Beresen_US
dc.contributor.authorXiongfei Wangen_US
dc.contributor.authorFrede Blaabjergen_US
dc.contributor.authorMarco Liserreen_US
dc.contributor.authorClaus Leth Baken_US
dc.date.accessioned2020-05-20T08:35:13Z-
dc.date.available2020-05-20T08:35:13Z-
dc.date.issued2016en_US
dc.identifier.issn0885-8993en_US
dc.identifier.issn1941-0107en_US
dc.identifier.other10.1109/TPEL.2015.2441299en_US
dc.identifier.urihttp://localhost/handle/Hannan/154295en_US
dc.identifier.urihttp://localhost/handle/Hannan/585908-
dc.description.abstractHarmonic stability problems caused by the resonance of high-order filters in power electronic systems are ever increasing. The use of passive damping does provide a robust solution to address these issues, but at the price of reduced efficiency due to the presence of additional passive components. Hence, a new method is proposed in this paper to optimally design the passive damping circuit for the LCL filters and LCL with multituned LC traps. In short, the optimization problem reduces to the proper choice of the multisplit capacitors or inductors in the high-order filter. Compared to existing design procedures, the proposed method simplifies the iterative design of the overall filter while ensuring the minimum resonance peak with a lower damping capacitor and a lower rated resistor. It is shown that there is only one optimal value of the damping resistor or quality factor to achieve a minimum filter resonance. The passive filters are designed, built, and validated both analytically and experimentally for verification.en_US
dc.publisherIEEEen_US
dc.relation.haspart7118223.pdfen_US
dc.subjecttrap filter|voltage-source converters|LCL filter|harmonic passive filters|resonance dampingen_US
dc.titleOptimal Design of High-Order Passive-Damped Filters for Grid-Connected Applicationsen_US
dc.typeArticleen_US
dc.journal.volume31en_US
dc.journal.issue3en_US
dc.journal.titleIEEE Transactions on Power Electronicsen_US
Appears in Collections:2016

Files in This Item:
File Description SizeFormat 
7118223.pdf1.7 MBAdobe PDFThumbnail
Preview File