Please use this identifier to cite or link to this item: http://localhost/handle/Hannan/88829
Title: Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel- Chromium-Molybdenum-Tantalum, Low-Carbon Nickel- Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel- Molybdenum-Chromium Al
Year: 2014
Abstract: This specification<sup>2</sup> covers plate, sheet, and strip of low-carbon nickel-chromium-molybdenum alloys (UNS N10276, N06022, N06455, N06035, UNS N06058, UNS N06059),3 low-carbon nickel-chromium-molybdenum-copper alloy (UNS N06200), low-carbon nickel-molybdenumchromium (UNS N10362), low-carbon nickel-chromiummolybdenumTantalum alloy (UNS N06210), and low-carbon nickel-chromium-molybdenum-tungsten alloy (UNS N06686) as shown in Table 1, for use in general corrosive service. <br>The following products are covered under this specification: <br><em>Sheet and Strip</em>&#8212;Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish. <br><em>Plate</em>&#8212;Hot or cold rolled, solution annealed, and descaled. <br>The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. <br><em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.</em> <br><sup>2</sup>For ASME Boiler and Pressure Vessel Code applications, see related Specification SB-575 in Section II of that Code. <br><strong>*A Summary of Changes section appears at the end of this standard</strong>
Description: 
Gov't Doc #: BEPUIFAAAAAAAAAA
URI: http://localhost/handle/Hannan/88829
More Information: ASTM B575
More Information: 2014.10.01
4
Appears in Collections:ASTM

Files in This Item:
File SizeFormat 
BEPUIFAAAAAAAAAA.pdf76.53 kBAdobe PDF
Title: Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel- Chromium-Molybdenum-Tantalum, Low-Carbon Nickel- Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel- Molybdenum-Chromium Al
Year: 2014
Abstract: This specification<sup>2</sup> covers plate, sheet, and strip of low-carbon nickel-chromium-molybdenum alloys (UNS N10276, N06022, N06455, N06035, UNS N06058, UNS N06059),3 low-carbon nickel-chromium-molybdenum-copper alloy (UNS N06200), low-carbon nickel-molybdenumchromium (UNS N10362), low-carbon nickel-chromiummolybdenumTantalum alloy (UNS N06210), and low-carbon nickel-chromium-molybdenum-tungsten alloy (UNS N06686) as shown in Table 1, for use in general corrosive service. <br>The following products are covered under this specification: <br><em>Sheet and Strip</em>&#8212;Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish. <br><em>Plate</em>&#8212;Hot or cold rolled, solution annealed, and descaled. <br>The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. <br><em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.</em> <br><sup>2</sup>For ASME Boiler and Pressure Vessel Code applications, see related Specification SB-575 in Section II of that Code. <br><strong>*A Summary of Changes section appears at the end of this standard</strong>
Description: 
Gov't Doc #: BEPUIFAAAAAAAAAA
URI: http://localhost/handle/Hannan/88829
More Information: ASTM B575
More Information: 2014.10.01
4
Appears in Collections:ASTM

Files in This Item:
File SizeFormat 
BEPUIFAAAAAAAAAA.pdf76.53 kBAdobe PDF
Title: Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel- Chromium-Molybdenum-Tantalum, Low-Carbon Nickel- Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel- Molybdenum-Chromium Al
Year: 2014
Abstract: This specification<sup>2</sup> covers plate, sheet, and strip of low-carbon nickel-chromium-molybdenum alloys (UNS N10276, N06022, N06455, N06035, UNS N06058, UNS N06059),3 low-carbon nickel-chromium-molybdenum-copper alloy (UNS N06200), low-carbon nickel-molybdenumchromium (UNS N10362), low-carbon nickel-chromiummolybdenumTantalum alloy (UNS N06210), and low-carbon nickel-chromium-molybdenum-tungsten alloy (UNS N06686) as shown in Table 1, for use in general corrosive service. <br>The following products are covered under this specification: <br><em>Sheet and Strip</em>&#8212;Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish. <br><em>Plate</em>&#8212;Hot or cold rolled, solution annealed, and descaled. <br>The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. <br><em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.</em> <br><sup>2</sup>For ASME Boiler and Pressure Vessel Code applications, see related Specification SB-575 in Section II of that Code. <br><strong>*A Summary of Changes section appears at the end of this standard</strong>
Description: 
Gov't Doc #: BEPUIFAAAAAAAAAA
URI: http://localhost/handle/Hannan/88829
More Information: ASTM B575
More Information: 2014.10.01
4
Appears in Collections:ASTM

Files in This Item:
File SizeFormat 
BEPUIFAAAAAAAAAA.pdf76.53 kBAdobe PDF