Please use this identifier to cite or link to this item: http://localhost/handle/Hannan/72797
Title: Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
subject: coating and lining work inspection||individuals certified to perform Level I||II||and III inspection
Year: 2012
Abstract: This guide delineates the requirements for development of procedures for the qualification and certification of personnel who perform inspection of coating and lining work. Establishment of qualification requirements to verify conformance to specified requirements for nuclear facility coating and lining work is necessary to assure satisfactory performance of the inspections and to avoid compromising safety-related coating systems. <br>The intent of this guide is to provide a uniform interpretation of the requirements in ANSI/ASME N45.2.6 or ANSI/ASME NQA-1 as applicable, for the inspection of coating and lining work in nuclear facilities.&#160; <br>It is the intent of this guide to provide a recommended basis for qualification and certification, not to mandate a singular basis for all qualifications. Variations or simplifications of the qualifications described in this guide may be appropriate for special coating and lining work other than safety-related coating and lining systems. Similarly, the qualification and certification process might be abbreviated for work of minor scope such as touch-up. <br><em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.</em>
Description: 
Gov't Doc #: MHDRUEAAAAAAAAAA
URI: http://localhost/handle/Hannan/72797
More Information: ASTM D4537
More Information: 03/01/2012
7
Appears in Collections:ASTM

Files in This Item:
File SizeFormat 
MHDRUEAAAAAAAAAA.pdf168.82 kBAdobe PDF
Title: Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
subject: coating and lining work inspection||individuals certified to perform Level I||II||and III inspection
Year: 2012
Abstract: This guide delineates the requirements for development of procedures for the qualification and certification of personnel who perform inspection of coating and lining work. Establishment of qualification requirements to verify conformance to specified requirements for nuclear facility coating and lining work is necessary to assure satisfactory performance of the inspections and to avoid compromising safety-related coating systems. <br>The intent of this guide is to provide a uniform interpretation of the requirements in ANSI/ASME N45.2.6 or ANSI/ASME NQA-1 as applicable, for the inspection of coating and lining work in nuclear facilities.&#160; <br>It is the intent of this guide to provide a recommended basis for qualification and certification, not to mandate a singular basis for all qualifications. Variations or simplifications of the qualifications described in this guide may be appropriate for special coating and lining work other than safety-related coating and lining systems. Similarly, the qualification and certification process might be abbreviated for work of minor scope such as touch-up. <br><em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.</em>
Description: 
Gov't Doc #: MHDRUEAAAAAAAAAA
URI: http://localhost/handle/Hannan/72797
More Information: ASTM D4537
More Information: 03/01/2012
7
Appears in Collections:ASTM

Files in This Item:
File SizeFormat 
MHDRUEAAAAAAAAAA.pdf168.82 kBAdobe PDF
Title: Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
subject: coating and lining work inspection||individuals certified to perform Level I||II||and III inspection
Year: 2012
Abstract: This guide delineates the requirements for development of procedures for the qualification and certification of personnel who perform inspection of coating and lining work. Establishment of qualification requirements to verify conformance to specified requirements for nuclear facility coating and lining work is necessary to assure satisfactory performance of the inspections and to avoid compromising safety-related coating systems. <br>The intent of this guide is to provide a uniform interpretation of the requirements in ANSI/ASME N45.2.6 or ANSI/ASME NQA-1 as applicable, for the inspection of coating and lining work in nuclear facilities.&#160; <br>It is the intent of this guide to provide a recommended basis for qualification and certification, not to mandate a singular basis for all qualifications. Variations or simplifications of the qualifications described in this guide may be appropriate for special coating and lining work other than safety-related coating and lining systems. Similarly, the qualification and certification process might be abbreviated for work of minor scope such as touch-up. <br><em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.</em>
Description: 
Gov't Doc #: MHDRUEAAAAAAAAAA
URI: http://localhost/handle/Hannan/72797
More Information: ASTM D4537
More Information: 03/01/2012
7
Appears in Collections:ASTM

Files in This Item:
File SizeFormat 
MHDRUEAAAAAAAAAA.pdf168.82 kBAdobe PDF