Please use this identifier to cite or link to this item: http://localhost/handle/Hannan/71126
Title: Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
Year: 2015
Abstract: This specification covers hot isostatically-pressed, powder metallurgy, stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts made to specified dimensions or to dimensional standards, such as in ASME specification B16.5. <br>Several grades of martensitic, austenitic, age hardening, and austenitic-ferritic stainless steels are included in this specification. <br>Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. <br>This specification is expressed in both inch-pound units and in SI units. Unless the order specifies the applicable "M" specification designation (SI units), however, the material shall be furnished to inch-pound units. <br>The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. <br>The following safety hazards caveat pertains only to test methods portions 8.1, 8.2, 9.5 &#8211; 9.7, and Section 10 of this specification: <em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.</em> <br><strong>*A Summary of Changes section appears at the end of this standard</strong>
Description: 
Gov't Doc #: JVHFKFAAAAAAAAAA
URI: http://localhost/handle/Hannan/71126
More Information: ASTM A988/A988M
More Information: 2015.03.01
11
Appears in Collections:ASTM

Files in This Item:
File Description SizeFormat 
JVHFKFAAAAAAAAAA.pdf134.69 kBAdobe PDFThumbnail
Preview File
Title: Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
Year: 2015
Abstract: This specification covers hot isostatically-pressed, powder metallurgy, stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts made to specified dimensions or to dimensional standards, such as in ASME specification B16.5. <br>Several grades of martensitic, austenitic, age hardening, and austenitic-ferritic stainless steels are included in this specification. <br>Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. <br>This specification is expressed in both inch-pound units and in SI units. Unless the order specifies the applicable "M" specification designation (SI units), however, the material shall be furnished to inch-pound units. <br>The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. <br>The following safety hazards caveat pertains only to test methods portions 8.1, 8.2, 9.5 &#8211; 9.7, and Section 10 of this specification: <em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.</em> <br><strong>*A Summary of Changes section appears at the end of this standard</strong>
Description: 
Gov't Doc #: JVHFKFAAAAAAAAAA
URI: http://localhost/handle/Hannan/71126
More Information: ASTM A988/A988M
More Information: 2015.03.01
11
Appears in Collections:ASTM

Files in This Item:
File Description SizeFormat 
JVHFKFAAAAAAAAAA.pdf134.69 kBAdobe PDFThumbnail
Preview File
Title: Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
Year: 2015
Abstract: This specification covers hot isostatically-pressed, powder metallurgy, stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts made to specified dimensions or to dimensional standards, such as in ASME specification B16.5. <br>Several grades of martensitic, austenitic, age hardening, and austenitic-ferritic stainless steels are included in this specification. <br>Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. <br>This specification is expressed in both inch-pound units and in SI units. Unless the order specifies the applicable "M" specification designation (SI units), however, the material shall be furnished to inch-pound units. <br>The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. <br>The following safety hazards caveat pertains only to test methods portions 8.1, 8.2, 9.5 &#8211; 9.7, and Section 10 of this specification: <em>This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.</em> <br><strong>*A Summary of Changes section appears at the end of this standard</strong>
Description: 
Gov't Doc #: JVHFKFAAAAAAAAAA
URI: http://localhost/handle/Hannan/71126
More Information: ASTM A988/A988M
More Information: 2015.03.01
11
Appears in Collections:ASTM

Files in This Item:
File Description SizeFormat 
JVHFKFAAAAAAAAAA.pdf134.69 kBAdobe PDFThumbnail
Preview File