Please use this identifier to cite or link to this item: http://localhost/handle/Hannan/71121
Title: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
Year: 2016
Abstract: This specification<sup>2</sup> covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures and in other applications requiring notch toughness. Several grades of ferritic steel are included as listed in <span style="color: #000000;">Table 1</span>. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on impact properties. <br>The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the &#8220;M&#8221; designation of this specification is specified in the order. <br>NOTE 1&#8212;The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as &#8220;nominal diameter,&#8221; &#8220;size,&#8221; and &#8220;nominal size.&#8221; <br><sup>2</sup> For ASME Boiler and Pressure Vessel Code applications see related Specification SA-333 in Section II of that Code. <br><span style="font-weight: bold;">*A Summary of Changes section appears at the end of this standard</span>
Description: 
Gov't Doc #: JVCNOFAAAAAAAAAA
URI: http://localhost/handle/Hannan/71121
More Information: ASTM A333/A333M
More Information: 2016.03.01
8
Appears in Collections:ASTM

Files in This Item:
File Description SizeFormat 
JVCNOFAAAAAAAAAA.pdf118.87 kBAdobe PDFThumbnail
Preview File
Title: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
Year: 2016
Abstract: This specification<sup>2</sup> covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures and in other applications requiring notch toughness. Several grades of ferritic steel are included as listed in <span style="color: #000000;">Table 1</span>. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on impact properties. <br>The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the &#8220;M&#8221; designation of this specification is specified in the order. <br>NOTE 1&#8212;The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as &#8220;nominal diameter,&#8221; &#8220;size,&#8221; and &#8220;nominal size.&#8221; <br><sup>2</sup> For ASME Boiler and Pressure Vessel Code applications see related Specification SA-333 in Section II of that Code. <br><span style="font-weight: bold;">*A Summary of Changes section appears at the end of this standard</span>
Description: 
Gov't Doc #: JVCNOFAAAAAAAAAA
URI: http://localhost/handle/Hannan/71121
More Information: ASTM A333/A333M
More Information: 2016.03.01
8
Appears in Collections:ASTM

Files in This Item:
File Description SizeFormat 
JVCNOFAAAAAAAAAA.pdf118.87 kBAdobe PDFThumbnail
Preview File
Title: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
Year: 2016
Abstract: This specification<sup>2</sup> covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures and in other applications requiring notch toughness. Several grades of ferritic steel are included as listed in <span style="color: #000000;">Table 1</span>. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on impact properties. <br>The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the &#8220;M&#8221; designation of this specification is specified in the order. <br>NOTE 1&#8212;The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as &#8220;nominal diameter,&#8221; &#8220;size,&#8221; and &#8220;nominal size.&#8221; <br><sup>2</sup> For ASME Boiler and Pressure Vessel Code applications see related Specification SA-333 in Section II of that Code. <br><span style="font-weight: bold;">*A Summary of Changes section appears at the end of this standard</span>
Description: 
Gov't Doc #: JVCNOFAAAAAAAAAA
URI: http://localhost/handle/Hannan/71121
More Information: ASTM A333/A333M
More Information: 2016.03.01
8
Appears in Collections:ASTM

Files in This Item:
File Description SizeFormat 
JVCNOFAAAAAAAAAA.pdf118.87 kBAdobe PDFThumbnail
Preview File