Please use this identifier to cite or link to this item: http://localhost/handle/Hannan/209797
Title: Truncated Circular Cone Slot Antenna Array That Radiates a Circularly Polarized Conical Beam
Authors: Guanshen Chenhu;Junping Geng;Han Zhou;Jianping Li;Liang liu;Xianling Liang;Weiren Zhu;Ronghong Jin;Richard W. Ziolkowski
Year: 2017
Publisher: IEEE
Abstract: A truncated circular cone slot array antenna that radiates a circularly polarized (CP) conical beam is presented. The direction into which the conical beam radiates depends mainly on the tilt angle of the outer conductor as well as the proper arrangement of the positions of its two slot arrays. The CP property is realized by introducing quasi-perpendicular slots that are cut into the outer conductor of a truncated circular cone. To illustrate the performance characteristics of this CP conical beam antenna, the tilt angle is set to 45&x00B0; and the beam angle is pointed at 45&x00B0; from boresight within the operating band. A prototype was fabricated and tested. The measured results demonstrate that its -10 dB impedance bandwidth (|S<sub>11</sub> | &lt;; -10 dB) is 720 MHz, from 5.05 to 5.77 GHz; and its 3 dB axial-ratio (AR) bandwidth is 500 MHz, from 5.5 to 6.0 GHz. Its realized gain over this AR bandwidth ranges from 4.84 to 5.8 dB. The designed beam direction can be easily changed to meet specific application requirements. Moreover, it can be readily reconfigured to be a conformal antenna mounted on the top of a high-speed mobile platform.
Description: 
URI: http://localhost/handle/Hannan/209797
volume: 16
More Information: 2574,
2577
Appears in Collections:2017

Files in This Item:
File SizeFormat 
8000311.pdf1.02 MBAdobe PDF
Title: Truncated Circular Cone Slot Antenna Array That Radiates a Circularly Polarized Conical Beam
Authors: Guanshen Chenhu;Junping Geng;Han Zhou;Jianping Li;Liang liu;Xianling Liang;Weiren Zhu;Ronghong Jin;Richard W. Ziolkowski
Year: 2017
Publisher: IEEE
Abstract: A truncated circular cone slot array antenna that radiates a circularly polarized (CP) conical beam is presented. The direction into which the conical beam radiates depends mainly on the tilt angle of the outer conductor as well as the proper arrangement of the positions of its two slot arrays. The CP property is realized by introducing quasi-perpendicular slots that are cut into the outer conductor of a truncated circular cone. To illustrate the performance characteristics of this CP conical beam antenna, the tilt angle is set to 45&x00B0; and the beam angle is pointed at 45&x00B0; from boresight within the operating band. A prototype was fabricated and tested. The measured results demonstrate that its -10 dB impedance bandwidth (|S<sub>11</sub> | &lt;; -10 dB) is 720 MHz, from 5.05 to 5.77 GHz; and its 3 dB axial-ratio (AR) bandwidth is 500 MHz, from 5.5 to 6.0 GHz. Its realized gain over this AR bandwidth ranges from 4.84 to 5.8 dB. The designed beam direction can be easily changed to meet specific application requirements. Moreover, it can be readily reconfigured to be a conformal antenna mounted on the top of a high-speed mobile platform.
Description: 
URI: http://localhost/handle/Hannan/209797
volume: 16
More Information: 2574,
2577
Appears in Collections:2017

Files in This Item:
File SizeFormat 
8000311.pdf1.02 MBAdobe PDF
Title: Truncated Circular Cone Slot Antenna Array That Radiates a Circularly Polarized Conical Beam
Authors: Guanshen Chenhu;Junping Geng;Han Zhou;Jianping Li;Liang liu;Xianling Liang;Weiren Zhu;Ronghong Jin;Richard W. Ziolkowski
Year: 2017
Publisher: IEEE
Abstract: A truncated circular cone slot array antenna that radiates a circularly polarized (CP) conical beam is presented. The direction into which the conical beam radiates depends mainly on the tilt angle of the outer conductor as well as the proper arrangement of the positions of its two slot arrays. The CP property is realized by introducing quasi-perpendicular slots that are cut into the outer conductor of a truncated circular cone. To illustrate the performance characteristics of this CP conical beam antenna, the tilt angle is set to 45&x00B0; and the beam angle is pointed at 45&x00B0; from boresight within the operating band. A prototype was fabricated and tested. The measured results demonstrate that its -10 dB impedance bandwidth (|S<sub>11</sub> | &lt;; -10 dB) is 720 MHz, from 5.05 to 5.77 GHz; and its 3 dB axial-ratio (AR) bandwidth is 500 MHz, from 5.5 to 6.0 GHz. Its realized gain over this AR bandwidth ranges from 4.84 to 5.8 dB. The designed beam direction can be easily changed to meet specific application requirements. Moreover, it can be readily reconfigured to be a conformal antenna mounted on the top of a high-speed mobile platform.
Description: 
URI: http://localhost/handle/Hannan/209797
volume: 16
More Information: 2574,
2577
Appears in Collections:2017

Files in This Item:
File SizeFormat 
8000311.pdf1.02 MBAdobe PDF