جهت دسترسی به کاربرگه ی زیر، از این لینک استفاده کنید. http://localhost/handle/Hannan/164478
عنوان: High Sensitivity Ammonia Gas Sensor Based on a Silica-Gel-Coated Microfiber Coupler
پدیدآورنده: Lei Sun;Yuliya Semenova;Qiang Wu;Dejun Liu;Jinhui Yuan;Tao Ma;Xinzhu Sang;Binbin Yan;Kuiru Wang;Chongxiu Yu;Gerald Farrell
تاریخ انتشار: 2017
ناشر: IEEE
چکیده: In this paper, a high-sensitivity ammonia gas sensor is proposed based on a silica-gel-coated microfiber coupler (MFC). The MFC structure is formed by the two tapered fibers with 3 &x03BC;m waist diameter each, which were fabricated by using a customized microheater brushing technique. Silica gel coating was prepared by a sol-gel technique and applied on the surface of the MFC as a thin layer. The spectral characteristics of the proposed sensor were studied under various ammonia gas concentrations. The experimental results show that the coating thickness strongly affected the sensitivity of the MFC-based sensor to ammonia gas concentration. For the sensor with a 90 nm silica gel coating thickness, the highest measurement sensitivity is 2.23 nm/ppm for ammonia gas concentration, and the resolution is as good as 5 ppb, while the measured response and recovery times are ~50 and 35 s, respectively. Finally, it is demonstrated that the proposed sensor offers good repeatability and selectivity to ammonia gas.
آدرس: http://localhost/handle/Hannan/164478
دوره: 35
شماره: 14
اطلاعات بیشتر: 2864,
2870
مجموعه(های):2017

پیوست های این کاربرگه
فایل اندازهفرمت  
7920327.pdf653.7 kBAdobe PDF
عنوان: High Sensitivity Ammonia Gas Sensor Based on a Silica-Gel-Coated Microfiber Coupler
پدیدآورنده: Lei Sun;Yuliya Semenova;Qiang Wu;Dejun Liu;Jinhui Yuan;Tao Ma;Xinzhu Sang;Binbin Yan;Kuiru Wang;Chongxiu Yu;Gerald Farrell
تاریخ انتشار: 2017
ناشر: IEEE
چکیده: In this paper, a high-sensitivity ammonia gas sensor is proposed based on a silica-gel-coated microfiber coupler (MFC). The MFC structure is formed by the two tapered fibers with 3 &x03BC;m waist diameter each, which were fabricated by using a customized microheater brushing technique. Silica gel coating was prepared by a sol-gel technique and applied on the surface of the MFC as a thin layer. The spectral characteristics of the proposed sensor were studied under various ammonia gas concentrations. The experimental results show that the coating thickness strongly affected the sensitivity of the MFC-based sensor to ammonia gas concentration. For the sensor with a 90 nm silica gel coating thickness, the highest measurement sensitivity is 2.23 nm/ppm for ammonia gas concentration, and the resolution is as good as 5 ppb, while the measured response and recovery times are ~50 and 35 s, respectively. Finally, it is demonstrated that the proposed sensor offers good repeatability and selectivity to ammonia gas.
آدرس: http://localhost/handle/Hannan/164478
دوره: 35
شماره: 14
اطلاعات بیشتر: 2864,
2870
مجموعه(های):2017

پیوست های این کاربرگه
فایل اندازهفرمت  
7920327.pdf653.7 kBAdobe PDF
عنوان: High Sensitivity Ammonia Gas Sensor Based on a Silica-Gel-Coated Microfiber Coupler
پدیدآورنده: Lei Sun;Yuliya Semenova;Qiang Wu;Dejun Liu;Jinhui Yuan;Tao Ma;Xinzhu Sang;Binbin Yan;Kuiru Wang;Chongxiu Yu;Gerald Farrell
تاریخ انتشار: 2017
ناشر: IEEE
چکیده: In this paper, a high-sensitivity ammonia gas sensor is proposed based on a silica-gel-coated microfiber coupler (MFC). The MFC structure is formed by the two tapered fibers with 3 &x03BC;m waist diameter each, which were fabricated by using a customized microheater brushing technique. Silica gel coating was prepared by a sol-gel technique and applied on the surface of the MFC as a thin layer. The spectral characteristics of the proposed sensor were studied under various ammonia gas concentrations. The experimental results show that the coating thickness strongly affected the sensitivity of the MFC-based sensor to ammonia gas concentration. For the sensor with a 90 nm silica gel coating thickness, the highest measurement sensitivity is 2.23 nm/ppm for ammonia gas concentration, and the resolution is as good as 5 ppb, while the measured response and recovery times are ~50 and 35 s, respectively. Finally, it is demonstrated that the proposed sensor offers good repeatability and selectivity to ammonia gas.
آدرس: http://localhost/handle/Hannan/164478
دوره: 35
شماره: 14
اطلاعات بیشتر: 2864,
2870
مجموعه(های):2017

پیوست های این کاربرگه
فایل اندازهفرمت  
7920327.pdf653.7 kBAdobe PDF